Two Way Barbed Valve

Two Way Barbed Valve: a small ball valve with a hose barb on each side, for turning the flow of surfactant or bleach on and off at your X-Jet Modified Gun. In 1/4" or 3/8" barbs.

Install the Two Way Barbed Valve to control the flow of surfactant or bleach when you use your X-Jet Modified Gun. This small ball valve has two identical hose barbs, one on either side of the lever.

How to Hook It Up

1. Use a short length of clear braid hose to connect one barb to the injector on the gun.
2. Attach a longer length of hose to the other barb, and run it to your X-Jet Pail or chemical bucket.

Which Size Do I Need?

• 1/4": For 1/4" hose.
• 3/8": For the X-Jet gun and our 3/8" X-Jet Hose.

Installation Tips

• To help the hose slip onto the barb, lubricate it with a little soap or warm the hose with a heat gun.
• You'll probably want a pair of hose clamps to hold the hoses in place (not included).
• Match the hose's inside diameter to the valve's barb size.

Specifications

• Type: Two-way ball valve with hose barbs
• Barb sizes: 1/4" or 3/8"
• Hose clamps: Not included

Hose for This Valve

• Clearbraid Hose, sold by the foot in 1/4" and 3/8"
• X-Jet Hose, 3/8", in 50 ft or 100 ft

Learn From Doug

Starting a pressure washing business? The Online Pressure Washing School will help you drastically cut your learning curve, and my YouTube channel has free pressure washing tips and tricks. Questions about this product? Use our contact form and I will be glad to help.