Kingslinger Soft Wash System Air Diaphragm-RSKSAD
$1949.00 7GPM pump without hose or hose reel option.
$2349.00 10GPM pump without hose or hose reel option.
Hose and Hose reel options can be chosen below.
See video below about how to install the mixing station on your compressor….VERY EASY
The Kingslinger Soft Wash System Air Diaphragm comes complete with an air compressor; Flo-Jet 7GPM air diaphragm pump; Dougenator mixing system for metering your bleach, water, and soap; and the Tsunami Air Water Separator. All mounted on the compressor for a small foot print and easy installation. All you have to supply are your plumbing hose from the Dougenator to your tanks and hose reel and bulkhead fittings for the tanks.
Please specify in your order if you will use 1/2″ or 3/4″ hose from the Dougenator to your tanks, so we can send the right size cam lock fittings. Bulkhead fittings are also available to purchase as an option.
- 4 GPM portable pontoon air compressor
- 5 HP Honda Industrial OHC/OHV premium residential gas engine
- 155 PSI Max Pressure
- Maximum Pressure: CFM at 90 PSI: 5.0; CFM at 40 PSI:6.9;
- Comes with a Quart of Engine Oil that you must put in prior to using
- Purchase comes with one gallon of King’s Kling Roof and House Wash Surfactant
- Dimensions LxWXH (in) 24 1/2 x 21 1/2 x 20
The Kingslinger Soft Wash System is a great space-saver for truck and trailer rigs. See video below about how to install the mixing station on your compressor….VERY EASY
One clarification on the distance: we were actually getting 35-40 feet, not 60 feet. When we were spraying, we measured by stepping it off and multiplying the steps by 3 feet. After shooting the video and I had left, Gerald found his measuring wheel and measured it and asked me to clarify the correct distance. So basically, it will shoot the same distance as any Air System or 12Volt System out there: 35-40 feet, not 60. We do not want to mislead anyone.
Dougenator Mixing Valve Settings
Mix settings on the dougenator: When the water dial is on 5 and the bleach dial on 5, you are using a 50/50 mix. Always use the dougenator with the water on 5. You want to get full flow of water at all times. The only time you adjust the water down, is if you need a stronger mix than 50/50.
To adjust my bleach %, I always go by the numbers of 1=10%, 2=20%, 3=30%-etc. While this may not be exact on the number % you are getting, it is a guide that I follow. You really have to play around with the settings to get them to the desired mix you like for various surfaces that you will clean. Porous, really dirty surfaces like roofs, stucco, brick, etc will require a stronger mix, like 30%-50%, while smooth surfaces like vinyl, hardie, metal, etc will require lighter mixes, like 10%-20%. Again you just have to play around with it as you use it to figure out what settings work for you. The type of surface you are cleaning and the degree of staining will determine the mix percentage you will use. Green Algae comes off easy and requires a lower percentage. Black mildew stains require stronger percentage.
For the surfactant setting, the smaller diameter hose you use the better. I’ve never needed to put my soap dial on more than 2. Using to much soap, can cause longer rinsing time. It can also cause longer cleaning times. I suggest you use 1/4 or 3/8 hose for your surfactant tank. Presently I do not use the surfactant valve on my Kingslinger. I add my surfactant to my bleach. My surfactant valve is capped off, and is ready to use as a spare should one of the metering or check valve fails. It is also available to use to apply some other type of chemical like a degreaser or a liquid plant food if needed.
Using Kings Kling surfactant: Whether you are mixing it directly into your bleach tank, or using a surfactant tank and running through the Dougenator, mix at 1 ounce per gallon of bleach or water. Adjust accordingly to your liking.
Be sure to check out Doug Rucker’s online pressure washing school
More Pressure Washing and Soft Washing Equipment options.