The GF Mixing Valve System includes three bleach-resistant GF valves. Similar to how you use the Dougenator, you can use these valves to control the strength of your bleach, water, and soap mix for roof cleaning and house washing. But since these valves are metered incrementally, you can really fine-tune the strength of your mix. No need to batch mix when you can independently–and incrementally–adjust your bleach, soap, and water, allowing you to spray to your desired ratio with the GF Mixing Valve System.
When you start using the GF Mixing Valve System, I suggest that you test out different levels to get the mix dialed in to your preference. Setting the bleach and water dials to full open will give you a 50/50 mix. For moderately dirty shingle roofs, you will want a slightly weaker mix, and for house washes, you will want it significantly lighter. But you need to play with the system to get it set to your liking.
Please make sure you watch the videos on Installing Dougenator Fittings and Attaching Dougenator Fittings that come with your GF Valve Mixing System. If you over-tighten the fittings and crack the valves, you will be responsible for purchasing new valve(s), so follow the instructions closely. We do not attach the outlet fittings because we do not know the direction you may want them. If you’d like us to install them, we can, but we will install them all pointing straight behind the valve. You must let us know this in the notes of your order.
As always, if you have any questions call or text the store at 346-364-7573. This number is monitored during store hours only. Monday-Friday 9-12, and 1-3pm, Fridays 9-12. Closed most Holidays. If you call or text outside of those hours, we will return your message during our normal business hours.
VERY IMPORTANT: PLEASE STATE IN THE SHIPPING NOTES WHETHER YOU WANT 1/2 INCH OR 3/4 INCH HOSE BARBS FOR YOUR INLET AND/OR OUTLET BARBS.